Описание

Sound devices 633 инструкция на русском

Краткое описание:
Настройка маршрутизации проводных/беспроводных гарнитур. Ранее приложение называлось AudioRoutingSettings.

Описание:
О возникших проблемах, пожалуйста, пишите здесь.

Route the media audio to (Built-In speaker, Wired Headphones, Wired Headset (with mic), Earpiece, Aux Digital(HDMI), Bluetooth(A2DP), Bluetooth(mono), Bluetooth(mono)(dynamic), Dock(Analog), Dock(Digital)).
Route the phone call audio to (Built in Earpiece, External speaker, Bluetooth (mono), Wired Headphones, Wired Headset (with mic), Dock (Analog), Dock (Digital)
Phone call audio to Bluetoth A2DP(media) NOT allowed in Android.
Announce Callers Names (Caller ID) when they call (needs contact list)
Turn Notifications and Ringtones on and off depending on the audio output being used.
Send Text-To-Speech audio to various outputs with/without delays:
Wired Headset detection - ALLOW or IGNORE the headphone/headset plug in/out detection.
Wired Headset microphone - DETECT or IGNORE that a headset has a microphone when plugged in.
Send audio to Bluetooth headsets and your car's Bluetooth connection.

1) SoundAbout Service - Turn service "On-With Status", "On-No Status", "OFF".
Can be used to remove constant notification required by Android 4.3+.

2) Media Audio - Route the media audio to (Built-In speaker, Wired Headphones, Wired Headset (with mic), Earpiece, Aux Digital(HDMI), Bluetooth(A2DP), Bluetooth(mono), Bluetooth(mono)(dynamic), Dock (Analog), Dock (Digital), USB Client (to read music files from another device), USB Host (to share files from phone to another device)
(Some outputs are enabled for the PRO VERSION only)

3) Phone call audio - Route the phone call audio to (Built in Earpiece, External speaker, Bluetooth (mono), Wired Headphones, Wired Headset (with mic), Dock (Analog), Dock (Digital)
(Phone call audio to Bluetoth A2DP(media) NOT allowed in Android)

4) Alert behavior - Settings announce Caller ID and to also (route/block) notification or ringtone audio based on what audio output is currently being used:
CallerID Alert (Pro version) - Settings for announcing a contact's name or the caller's number when the phone is ringing.
- Speak Caller ID - Check this to make SoundAbout announce the caller (using contacts list) when the phone is ringing.
- Introduction - What do say, during the Caller ID announcement before the caller's name.
- Repeat Caller ID - How many times to repeat the caller's name.
- Alert Type - Treat the announcement like a (Ring, Alarm, Media, DTMF).
Wired Headset behavior - Settings to override the audio mode for notifications/ringtones when a wired headset is in use.
- Notifications To - Where to allow Notification audio.
- Ringtones To - Where to allow Ringtone audio.
Bluetooth (A2DP) behavior (Pro version) - Settings to override the audio mode for notifications/ringtones when a Bluetooth A2DP device is in use.
- Notifications To - Where to allow Notification audio.
- Ringtones To - Where to allow Ringtone audio.
Bluetooth (mono) behavior (Pro version) - Settings to override the audio mode for notifications/ringtones when a Bluetooth mono device is in use.
Notifications and Ringtones CANNOT be sent to Bluetooth mono.
- Notifications To - Where to allow Notification audio.
- Ringtones To - Where to allow Ringtone audio.
Aux Digital (HDMI) behavior (Pro version) - Settings to override the audio mode for notifications/ringtones when a Aux Digital (HDMI) device is in use.
- Notifications To - Where to allow Notification audio.
- Ringtones To - Where to allow Ringtone audio.
Dock behavior (Pro version) - Settings to override the audio mode for notifications/ringtones when a Dock is in use.
- Notifications To - Where to allow Notification audio.
- Ringtones To - Where to allow Ringtone audio.

5) Connectable devices - (Wired headset, Bluetooth, Docks, USB. etc)
Wired Headset settings - Settings for routing wired headset audio.
- Wired Headset detection - Check this to allow SoundAbout to detect or ignore when a headset is plugged into the device. (un-check if device thinks a headset is plugged in when it is not)
- Wired Headset Microphone - Check this to allow SoundAbout to detect a wired headset microphone when a headset is plugged in.
- Un-plug pauses music player - Setting to pause music player when headset is unplugged. (Music apps may do this automatically)
- Plug-in continues music player - Setting to continue music player when headset is plugged in. (Music apps may do this automatically)
- Plug-in Volume ON/Off (Pro Version) - Turn ON and set default volume when headset is plugged in.
- Plug-in Volume (Pro Version) - Set default volume when headset is plugged in.
Bluetooth settings - Settings for routing Bluetooth audio.
- Bluetooth Auto Enable - Automatically enable Bluetooth when Bluetooth output is selected.
- Media Audio behavior - Settings for automatically routing Bluetooth audio when Media Audio is set to (Let App Decide).
- - Bluetooth (A2DP) auto usage - Allow/Deny the connected Bluetooth media device to be the default output for media.
- - Bluetooth (mono) auto usage - Allow/Deny the connected Bluetooth (mono) media device to be the default output for media.
- - Bluetooth (dynamic) auto usage - Allow/Deny the connected Bluetooth (mono) media device to detect and play media by default.
- Phone call behavior - Settings for automatically routing Bluetooth audio when Phone call Audio is set to (Let App Decide).
- - Bluetooth (mono) auto usage - Allow/Deny the connected Bluetooth (mono) device to be the default output for phone calls.
- - Disconnect PBAP client - Setting to disconnect car from retreiving the address book during a phone call. (Some cars usage of PBAP interrupts Bluetooth phone call signal)
- - Disable Wired audio - Allow/Deny Wired Headset when using Bluetooth device for a Phone call. (Some phones try to force the wired headset to be used for phone call if the headset is plugged in)
- (Mono) microphone override - Use the Bluetooth (mono) device microphone for voice input while using audio output set in the Media audio setting.
- Bluetooth disconnect audio - When a Bluetooth device is disconnected when playing media, either switch to "Media audio" setting (checked) or go silent (un-checked).
Dock settings - Settings for routing Dock audio.
- Analog Dock audio usage - Allow/Deny the connected Analog dock to be the default output for media.
- Digital Dock audio usage - Allow/Deny the connected Digital dock to be the default output for media.
USB settings - Settings for toggling USB Host/Client.
- USB Host usage - Allow/Deny using the device as a USB host by default.
- USB Client usage - Allow/Deny using the device as a USB client by default.

6) Text-To-Speech behavior (Android 4.0+)(Pro version) - Settings to send Text-To-Speech audio to various outputs with/without delays:
Android TTS Settings - Opens the Android TTS settings screen so that you can choose SoundAbout TTS as your Text-To-Speech engine.
SoundAbout TTS Engine - Lets you choose the REAL TTS engine that SoundAbout TTS will use to convert text to audio, after switching the audio output to the desired "Audio Output" setting.
Audio Output - When a Text to Speech request occurs, this setting will switch the audio audio to (External speaker, Wired Headphones, Wired Headset (with mic), Earpiece, Aux Digital(HDMI), Bluetooth(A2DP), Bluetooth(mono), Dock(Analog), Dock(Digital))
Max Utterance per request - How many TTS items to process per request. Handy if the client app (Navigation app) tries to process ALL the TTS items at one time. This lets you do 1,2,3.etc at a time.
Delay utterance (secs) - Lets you delay before sending the audio to output. Handy to allow Bluetooth mono to connect.
Allow during phone call - Allows TTS audio to play in background while you are on a phone call.
Allow background audio - Allows existing audio to continue at a lower volume while TTS audio is playing.

7) Voice Search behavior (Pro version) - Settings for selecting a Voice Search application and routing Voice Search audio to Bluetooth (mono), if connected. Helpful for voice searches in the car.
Choose Voice Search - Choose what application to run when the "SoundAbout Voice Search" icon is pressed on the home screen.
Media Audio - Lets you choose what audio output to use when doing the voice search.
Max wait to speak - The number of seconds to wait for the voice search app to prompt for input before quitting.
Wait to process search - How many seconds to wait while the voice search app looks up the results before quitting.
Wait after results - Lets you specify the number of seconds to wait after the search results for returned so that you can do another search.

Activity Icons:
1) SoundAbout main app - to configure all the settings for SoundAbout.
2) SoundAbout Voice Search - to switch audio output and THEN open the configured Voice Search app.
(configuration settings in SoundAbout main app)

Widgets:
1) Headset Toggle - to toggle a Wired Headset on or off.